| Vehicle |
- 1979-2004 mustang or fox body vehicle
with a pushrod motor |
| Engine |
- 302 based (8.2 deck) 351 (9.5) is extra
$$$ |
| Turbo Placement |
- front (inlet) to back (exhaust housing
exit) |
| Accessories kept |
- alternator & p/s (if using a ford
racing a/c elimination kit) |
| Other |
- must eliminate a/c, install manual
brake conversion (if using our 3" downpipes), remove the smog pump & smog
plumbing |
This stage 3 twin turbo header kit is capable of pushing 400 to 1200 horsepower.
This kit includes the passenger header, drivers header with t4 flanges on them. You will have
to relocate the battery to the trunk.
* Will fit up to a 76mm turbo. Will NOT fit a borg warner s400 t4 series turbo
or 88mm t4 turbo with out mods!
Instructions
Specs:
-1 3/4" primary headers
-t4 turbo inlet flange
-headers are made from 16g mild steel
-flanges are 3/8" mild steel
* 351 (9.5) engine with 3" downpipes have to run a manual brake conversion
* Shown with optional 38mm flanges
Limited 4 year warranty
This product was added to our catalog on Thursday 28 January, 2010.
