| Vehicle |
1979-1993 mustang or fox body vehicle |
| Engine |
302 based (8.2 deck) or 351 (9.5) is extra $$$ |
| Turbo Placement |
Front to back |
| Accessories kept |
alternator, p/s, & a/c with mods. No a/c kept on 351 motor |
| Other |
Must trim sway bar brackets and depending on year and model you may have to work with sway bar mods for fitment., and 3 spots on passenger side, eliminate the smog pump & plumbing |
This Pony Down Stage 2 single turbo kit is a passenger side turbo mounted kit for ease of installation, clean looks, and it allows you to keep the factory a/c and p/s. But the smog pump and plumbing have to be removed. Plus with the design of our cold side we can build the kits for fuel injection using a mass air meter (blow through), speed density, or carbed. The horsepower rating of this kit is from as low of 300hp to 750hp depending on your engine combo and the amount of boost you run. This is a complete kit alls you have to do is add a mass air meter and fuel upgrades (injectors and fuel pump) and your done. Looking below on our options everything is setup for a standard stage 2 kit. But there are options for upgrades and even a option to have the kit built for a 351.
*fyi* Our y-pipe ($249.99) takes place of your h or x pipe and allows your cat back exhaust to directly bolt up so there is no need to find a exhaust shop to finish off your exhaust.
Specs:
| Turbo |
Turbonectics 72mm, Upgrades available up to 76mm, or optional Precision 7675HP |
| Headers |
1 5/8" primary headers, with 1/2" flanges |
| Crossover |
2 1/2" with v bands, slip joint |
| Down pipe |
2 piece 3" downpipe, & 2x 02 sensor bungs |
| Wastegate |
(standard) Tial 38mm (optional) T 44mm |
| Cold Side Piping |
3" Aluminum from the turbo to the throttle body with bead rolled ends |
| Silicone |
all silicone couplers and hose clamps included |
| Blow off Valve |
Tial 50mm |
| Intercooler |
Pony Down Stage 2 - air to air (3" in / 3" out) with mounting brackets and hardware |
| Oil Feed/Drain |
aeroquip -4 steel braided feed line with aeroquip fittings, aeroquip drain hose with turbo drain flange, barbed fittings, & hose clamps |
| Filter |
4" k&n |
| Pipe Coating |
(standard) Silver or Flat Black (optional) Ceramic Silver or Ceramic Black |
Limited 4 year warranty
This product was added to our catalog on Friday 29 January, 2010.
