| Vehicle |
1979-1993 mustang or fox body vehicle |
| Engine |
302 based (8.2 deck) or 351 (9.5) is extra $$$ |
| Turbo Placement |
Front to back |
| Accessories kept |
alternator, p/s, & a/c with mods. No a/c kept on 351 motor |
| Other |
must trim sway bar brackets on frame rail for header clearance unless you select the non a/c header option. |
This Pony Down Stage 2 single turbo kit is a passenger side turbo mounted kit for ease of installation, clean looks, and it allows you to keep the factory a/c and p/s. Plus with the design of our cold side we can build the kits for fuel injection using a mass air meter (blow through), speed density, or carbed. The horsepower rating of this kit is from as low of 300hp to 750hp depending on your engine combo and the amount of boost you run. This is a complete kit alls you have to do is add a mass air meter and fuel upgrades (injectors and fuel pump) and your done. Looking below on our options everything is setup for a standard stage 2 kit. But there are options for upgrades and even a option to have the kit built for a 351.
Specs:
| Turbo |
Turbonectics 72mm, Upgrades available up to 76mm, or optional Precision 7675HP |
| Headers |
1 5/8" primary headers, with 3/8" flanges |
| Crossover |
2 1/2" with v bands, slip joint |
| Down pipe |
2 piece 3" downpipe, & 2x 02 sensor bungs |
| Wastegate |
(standard) Tial 38mm (optional) T 44mm |
| Cold Side Piping |
3" Aluminum from the turbo to the throttle body with bead rolled ends |
| Silicone |
all silicone couplers and hose clamps included |
| Blow off Valve |
Tial 50mm |
| Intercooler |
Stage 2 - air to air (3" in / 3" out) with mounting brackets and hardware |
| Oil Feed/Drain |
Complete oil feed and drain kit (1/8" & 1/2" npt tap required) |
| Filter |
4" k&n |
| Pipe Coating |
(standard) Silver or Flat Black (optional) Ceramic Silver or Ceramic Black |
Limited 4 year warranty
This product was added to our catalog on Friday 29 January, 2010.
