Stage 3 (79-93) twin turbo kit

Starting at: $6,999.99

Vehicle1979-1993 mustang or fox body vehicle
Engine302 based (8.2 deck) or 351 (9.5) is extra $$$
Turbo Placementfront to back
Accessories keptalternator & p/s (must use for racing a/c elim kit)
Othermust eliminate the smog pump & plumbing

This is our tried and true Pony Down stage 3 twin turbo (79-93) kit. For the hardcore guys that must have a twin turbo kit here you go. The kit allows you to keep your alternator in the stock location but you have to ditch smog stuff and the a/c using a ford racing a/c elim kit. But other than that your good to go. The horsepower rating of this kit is 400hp - 1000hp. The header primary's are 1 3/4" made from 16g mild steel. The down pipes are 3" in diameter for nice flow and features mandrel bends and has one 02 sensor bung in each down pipe. The cold side is 3" Aluminum piping from the intercooler to the throttle body and 2.5" from the turbos to the intercooler. This is a complete kit and the only items you have to add is a fuel pump, injecotrs, and a blow through mass air meter.


Turbo(standard) Turbonetics t4
Headers1 3/4" primary headers, with 1/2" flanges
Down pipe2 piece 3" downpipe with removable section for doing your plugs
Wastegate2x Tial 38mm
Cold Side Piping3" Aluminum piping from the turbo to the throttle body with bead rolled ends, 2.5" from the turbos to the intercooler
Siliconeall silicone couplers and hose clamps included
Blow off ValveTial 50mm
IntercoolerPony Down Stage 3 - air to air with mounting brackets and hardware
Oil Feed/Drainaeroquip branded oil feed and drain lines and fittinigs
Pipe Coating(standard) Flat Black (optional) Ceramic Silver or Ceramic Black

Limited 4 year warranty

  • Model: TT102
  • Shipping Weight: 140lbs
  • 99 Units in Stock
  • Manufactured by: Pony Down

Please Choose:

Engine Size

Intake Spacer

Header Flange



Mass Air, Speed Density, or Carb

EGR Spacer


PDP Sticker (when in stock)

This product was added to our catalog on Monday 10 August, 2015.