| Vehicle |
- 1979-2004 mustang with a push rod motor |
| Engine |
- 302 based (8.2 deck) or 351 based (9.5 deck) |
| Turbo Placement |
- Custom |
| Accessories kept |
- Custom |
| Other |
- Trimming the sway bar mounts on the frame rail may be required & * You must run a oil relocation kit with these headers! |
We designed these headers to give you more sparkplug and sparkplug boot room. The headers are a great starting point for our racers and fabricators out there. You have a option to select your primaries size, collectors sizes, and if you want a v-bands welded on the end of the collector. What we do is get the hard part done for you so you to mount the turbo where you want it and just do the piping from the headers to the turbo. These are great for forward exiting n/a headers or any build that needs for a custom turbo location on your car.
Specs:
3/8" header flanges
1 3/4" primaries (16g mild steel)
3" or 3 1/2" collector choice
3" or 3 1/2" v band ring welded on the collector (optional)
*FYI* We can make these headers for the following bolt patterns - AFR fel pro 1487 (3"), Trick Flow high port, and Trick Flow r (2.75")
Limited 4 year warranty
This product was added to our catalog on Saturday 23 July, 2016.
