| Vehicle |
1979-1993 mustang or fox body vehicle |
| Engine |
302 based (8.2 deck) or 351 (9.5) is extra $$$ |
| Turbo Placement |
sideways |
| Accessories kept |
alternator |
| Other |
trim sheet metal where inlet hole is in front of strut tower for cold side pipe & sway bar mount |
After building t6 hot sides and cold sides for years we decided to sell a
complete T6 kit. Its based off the Borg Warner S475 & S480 turbo. You can keep the radiator in the stock location. There is
enough room for a 3 core radiator
SPECS
| Turbo |
Borg Warner s475 or s480 |
| Headers |
1 3/4" primary headers, with 3/8" flanges |
| Crossover |
2.5" with v bands, flex joint |
| Down pipe |
4" downpipe with 1x 02 sensor bung |
| Wastegate |
Tial 44mm |
| Cold Side Piping |
3" Aluminum piping from the turbo to the throttle body with bead rolled ends |
| Silicone |
all silicone couplers and T bolt clamps included |
| Blow off Valve |
Tial 50mm |
| Intercooler |
Pony Down Stage 3 - air to air (3" in / 3" out) with mounting brackets and hardware |
| Oil Feed/Drain |
aeroquip -4 steel braided feed line with aeroquip fittings, aeroquip drain hose with turbo drain flange, barbed fittings, & hose clamps |
| Filter |
|
| Pipe Coating |
(standard) Silver or Flat Black (optional) Ceramic Silver or Ceramic Black |
Limited 4 year warranty
This product was added to our catalog on Saturday 10 January, 2015.
