| Vehicle |
- 1979-2004 mustang or fox body vehicle with a pushrod motor |
| Engine |
- 302 based (8.2 deck) or 351 (9.5) is extra $$$ |
| Turbo Placement |
- turbo sits right to left on the passenger side
(inlet faces towards stock air box area, exhaust towards the water pump) |
| Accessories kept |
- alternator with march alt style bracket kit, & power steering |
| Other |
- must remove the smog pump, smog plumbing,
a/c, & sway bar and mount may have to be trimmed or removed. ***You may need to move the radiator forward and shimmed up a little for upper radiator hose clearance. If routing the compressor outlet down trimming of the area below the outlet will be required*** |
The stage 3 "b-series design" single turbo headers and crossover kit is great for a mild to wild motor combo. Its capable of pushing 300 to 1200 horsepower depending on your engine mods, turbo, & boost level You can keep the factory p/s (moved with ford racing a/c removal kit or equivalent & alternator with a march alternator kit. This kit includes the passenger header, drivers header, crossover pipe, & v band clamps. For a downpipe or any other optional upgrades look below and make your selections
* Will fit up to a 76mm turbo. Will NOT fit a borg warner s400 t4 series turbo or 88mm t4 turbo with out mods!
Instructions
Specs:
-1 3/4" primary headers
-1 piece header flange
-3" crossover ( w/ slip joint, and v band flanges)
-t4 turbo inlet flange
-headers & crossover are made from 16g mild steel
-flanges are 1/2" mild steel
Limited 4 year warranty
This product was added to our catalog on Thursday 28 January, 2010.
