| Vehicle |
- 1979-2004 mustang with a push rod motor |
| Engine |
- 302 based (8.2 deck) or $ 351 (9.5)
deck $ |
| Turbo Placement |
- Custom |
| Accessories kept |
- Custom |
| Other |
- 9.2 motors might have to run a
shorty spark plug and 90 degree spark plug boot on the passenger side header |
These "R" (race) headers are a great starting point for our racers and
fabricators out there. They are a set of 1 3/4 primary headers with the
collectors going straight forward and a v-band welded on the end. What we do is
get is the hard part done and it will allow you to mount the turbo where you
want it and just do the piping from the headers to the turbo. These are great
for t6 builds, t4 builds, or any build that needs for a custom turbo location on
your car.
Specs:
3/8" header flanges
1 3/4" primaries (16g mild steel)
1 3/4" into 3" or 2 1/2" collector (16g mild steel)
3" or 2 1/2" v band ring welded on the collector
*FYI* We can make these headers for the following bolt patterns - standard sbf
(2"), trick flow r (2.75"), trick flow high port, and fel pro 1487 (3")
