| Vehicle | - 1979-2004 mustang with a push rod motor |
| Engine |
- 302 based (8.2 deck) or 351 based (9.5 deck) |
| Turbo Placement | - Custom |
| Accessories kept | - Custom |
| Other |
- Trimming the sway bar mounts on the frame rail may be
required, * You must run a oil relocation kit with these headers! |
We designed
these headers to give you more sparkplug and sparkplug boot room. The headers are a great starting point
for our racers and fabricators out there. You have a option to select your
primaries size, collectors sizes, and if you want a v-bands welded on the end of
the collector. What we do is get the hard part done for you so you to mount the turbo where you want it and just do the piping from the headers to the turbo. These are great for
forward exiting n/a headers or any build that needs for a custom turbo location
on your car.
Specs:
3/8" header flanges
1 3/4 primaries (16g mild steel)
3" or 3 1/2" collector choice
2.5"
or 3" v band ring welded on the collector
*FYI* We can make these
headers for the following bolt patterns - fel pro 1487 (3"), trick flow high port, and
trick flow r (2.75")
Limited 4 year warranty
This product was added to our catalog on Tuesday 26 July, 2016.
