| Vehicle |
- 1979-1993 mustang or fox body vehicle |
| Engine |
- 302 based (8.2 deck) or 351 (9.5) |
| Turbo Placement |
- passenger side - inlet facing sheet metal & exhaust housing facing water pump area |
| Accessories kept |
- alternator relocated to drivers side |
| Other |
- radiator moved under rad suppot & oil filter relocation/adapter required. |
This Pony Down T6 or T4 passenger side kit is exactly what you need for running a turbo on the passenger side of the engine compartment. These kits use our pony down 1.75" forward facing headers and will come with a 2.5" crossover with either a t6 or t4 flange. You can NOT keep the radiator in the stock location! We suggest moving the radiator to under the radiator support or using a radiator that will clear the exhaust housing.
If you select the High Port, Trick Flow 2.75" or Edelbrock 2.5" flanges you will get the universal Turbo Support (*welding required*) if that option is selected.
Check out the options listed below to custom build your header set!
T6 turbos from 88mm to 91mm fit!
T6 borg warner 400 series fit!
T4 turbos from 60mm to 88mm fit!
Specs:
-1 3/4" primary headers
-1 piece header flange
-2.5" crossover ( with slip joint, and v-band flanges)
-T6 or T4 turbo inlet flange
-Headers & crossover are made from 16g mild steel
-3/8" mild steel flanges
Limited 4 year warranty
This product was added to our catalog on Saturday 11 April, 2015.
