| Vehicle |
- 1979-2004 mustang or fox body vehicle |
| Engine |
- 302 based (8.2 deck) or 351 (9.5) is extra $$$ |
| Turbo Placement |
- drivers side - inlet facing sheet metal & exhaust housing facing water pump area |
| Accessories kept |
- alternator |
| Other |
- oil filter adapter/relocation kit required. 5" downpipe requires electric water pump. |
This Pony Down T6 or T4 drivers side kit is exactly what you need for running a turbo on the drivers side of the engine compartment. These kits use our pony down 1.75" forward facing turbo headers and will come standard with a 2.5" crossover with either a t6 or t4 flange. You can keep the radiator in the stock location and even fits oversized radiators ** unless you chose the dual wastegate option. Then you will have to move the radiator some to get the proper clearance for the lower radiator hose** Check out the options listed below to custom build your header set!
If you select the High Port, Trick Flow 2.75" or Edelbrock 2.5" flanges you will get the universal Turbo Support (*welding required*) if that option is selected.
T6 turbos from 88mm to 91mm fit!
T6 borg warner 400 series fit!
T4 turbos from 60mm to 88mm fit!
Specs:
-1 3/4" primary headers
-1 piece header flange
-2.5" crossover ( with slip joint, and v-band flanges)
-T6 or T4 turbo inlet flange
-Headers & crossover are made from 16g mild steel
-3/8" mild steel flanges
Limited 4 year warranty
This product was added to our catalog on Tuesday 03 June, 2014.
