pony down chip calibration reprogram

$24.99

Do you have our pony down chip and want to switch some things around on it. Just select this and we can change around your whole setup for you. Just mail us your chip and we will reprogram it to your new specs.

  1. Cubic Inch - Enter in the cubic inch of your motor.
  2. Tune Calibration - Chose our pony down "turbo safe tune" or N/A. You can always have the chip reprogrammed in the future if your needs or combo changes in the future.
  3. Computer - Select the computer you have. The computer is located behind the the passenger side kick panel.
  4. Smog/Thermactor Pump - Cars running our turbo kits can NOT run the smog pump and plumbing so you should select "off". If for some reason your running something custom and want your smog pump on then select "on".
  5. EGR - If you are running a egr system then select "on", if you are not then select "off".
  6. Rev Limter - The stock rev limiter is 6250rpm. I would suggest raising the rev limiter to 7000rpm and then using a msd box to lower the limit if you want.
  7. Idle - The idle at its stock setting is fine for a stock motor. But once a power adder or mods have been added the need to increase the idle really helps out. I would suggest raising the rev limiter to 850rpm unless you have a stock motor with just a turbo kit on it.
  8. O2 Sensors - There is no reason to run 2 stock O2 sensors. I would chose to run a single 02 sensor unless you have a reason you want to run the stock 2x O2 sensors.
  9. Once you have all this info set on our web page then add it to the cart.



     

Add to Cart:

  • Model: pdptune
  • Shipping Weight: 1lbs
  • 10 Units in Stock
  • Manufactured by: Pony Down

Please Choose:



Tune Calibration





Computer





Smog/Thermactor Pump





EGR Spacer





Rev Limiter





Idle





O2 Sensors






This product was added to our catalog on Wednesday 22 October, 2014.